acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Control Arm|Service Precautions|Front|Page 5806 > < Control Arm|Specifications
Page 1
background image

Control Arm: Service Precautions
Front

NOTE: 

-

Wipe off the dirt, oil or grease from the threads before tightening the fasteners.

-

The right and left damper forks are not interchangeable. The left damper fork is marked with "W5L" while the right damper fork is marked with
"W5R".

-

The right and left upper arms are not interchangeable. The led upper arm is marked with "L5J" while the right arm is marked with "R5J".

-

The stabilizer bar is symmetrical. Install with the paint mark facing rear of the vehicle.

-

After installing the suspension arm, check the front wheel alignment, and adjust if necessary.

CAUTION:  The vehicle should be on the ground before any bolts or nuts connected to rubber mounts or bushings are tightened. Do not interchange the
radius rod rubber bushings.

Control Arm|Service Precautions|Front|Page 5806 > < Control Arm|Specifications