TL L5-2451cc 2.5L SOHC MFI (1997)
5. Install the damper mounting washer, and loosely install a new self-locking nut.
6. Hold the damper shaft with a hex wrench, and tighten the self-locking nut.
INSTALLATION
1. Lower the rear suspension, and position the damper with the welded nut pointed toward the front of the vehicle.
2. Loosely install the two flange nuts.
3. Loosely install the flange bolt.
4. Raise the rear suspension with a floor jack until the vehicle just lids off the safety stand. The floor jack must be securely positioned or personal
injury may result.
