TL L5-2451cc 2.5L SOHC MFI (1997)
NOTE: Follow the manufacturer's instructions.
2. Assemble the damper in reverse order of disassembly, except the damper mounting washer and self-locking nut.
NOTE: Align the bottom of damper spring and spring lower seat as shown.
3. Position the damper mounting base on the damper unit as shown.
4. Compress the damper spring with the spring compressor.
5. Install the damper mounting washer, then loosely install a new self-locking nut.
6. Hold the damper shaft with a hex wrench, and tighten the self-locking nut.
INSTALLATION
