TL L5-2451cc 2.5L SOHC MFI (1997)
9. Install the disc spring.
NOTE: Except 1st-hold clutch: the 1st-hold clutch does not have a disc spring. Install the disc spring in the direction shown.
10. Soak the clutch discs thoroughly in ATF for a minimum of 30 minutes.
11. Starting with a clutch plate, alternately install the clutch plates and discs. Install the clutch end plate with the flat side toward the disc.
NOTE: Before installing the plates and discs, make sure the inside of the clutch drum is free of dirt or other foreign matter.
12. Install the snap ring.