TL L5-2451cc 2.5L SOHC MFI (1997)
Differential Carrier Assembly: Testing and Inspection
BACKLASH INSPECTION
1. Remove the tapered roller bearings.
Refer to Service and Repair.
2. Install the left driveshaft and the intermediate shaft in the side gears.
3. Measure the backlash of both pinion gears.
*
Standard: 0.05 - 0.15 mm (O.O02-0.006 inch).
*
Service Limit: 0.30 mm (0.012 inch).
-
If the backlash exceeds the service limit, replace the differential carrier.