TL L5-2451cc 2.5L SOHC MFI (1997)
Idler Gear: Service and Repair
REVERSE IDLER GEAR INSTALLATION
1. Coat the reverse idler gear shaft, needle bearing and new O-rings with lithium grease lightly.
2. Assemble new O-rings and needle bearing on the reverse idler gear shaft.
3. Install the reverse idler gear shaft in the reverse idler gear shaft holder, aligning the D-shaped cutout of the shaft with the D-shaped area of the
holder.
4. Install the reverse idler gear into the transmission housing.
5. Install the reverse idler gear shaft holder assembly in the transmission housing, then tighten the bolts.
