TL L5-2451cc 2.5L SOHC MFI (1997)
Lock-Up Control Solenoid Valve: Service and Repair
1. Remove the mounting bolts and lock-up control solenoid valve assembly.
NOTE: Be sure to remove or replace the lock-up control solenoid valve A and B as an assembly.
2. Check the lock-up control solenoid valve fluid passages for dust or dirt, and replace as an assembly, if necessary.
3. Clean the mounting surface and fluid passages of the lock-up control solenoid valve assembly, and install a new lock-up control solenoid valve
A/B with a new filter/gasket.
4. Check connector for rust, dirt or oil, and reconnect it securely.