TL L5-2451cc 2.5L SOHC MFI (1997)
5. Attach the dial indicator to the mainshaft 2nd gear as shown.
6. Measure the 2nd gear axial clearance while pushing the 4th/2nd clutch toward the 1st clutch.
*
STANDARD: 0.07 - 0.15 mm (0.003 - 0.006 inch).
NOTE: Take measurements in at least three places, and use the average as the actual clearance.
7. If the clearance is out of tolerance, remove the 2nd gear thrust washer and measure its thickness.
8. Select and install a new 2nd gear thrust washer, then recheck.
9. After replacing the 2nd gear thrust washer, make sure that the clearance is within tolerance.
