TL L5-2451cc 2.5L SOHC MFI (1997)
Shift Cable: Service and Repair
REPLACEMENT
WARNING:
-
Make sure the lifts, jacks and safety stands are placed properly.
-
Apply parking brake, and block rear wheels so the vehicle will not roll off stands and fall on you while working under it.
1. Shift the transmission into the [N] position.
2. Remove the center console panel.
3. Shift the transmission into the [1] position.
4. Remove the self-locking nut and shift cable end collar, then remove the shift cable from the shift lever link.
5. Remove the exhaust pipe A/catalytic converter exhaust pipe B assembly.
6. Remove the floor heat shield.
7. Remove the shift cable bracket and shift cable guide bracket.
CAUTION: Take care not to bend the shift cable when removing or installing it.
8. Remove the shift cable cover.
9. Remove the shift cable holder from the transmission rear cover.
10. Remove the control lever from the control shaft, then remove the shift cable.
