TL L5-2451cc 2.5L SOHC MFI (1997)
Shifter A/T: Adjustments
LINKAGE ADJUSTMENT
WARNING:
*
Make sure lifts, jacks and safety stands are placed properly.
*
Apply parking brake, and block rear wheels so vehicle will not roll off stands and fall on you while working under it.
1. Shift the transmission into the N position.
2. Remove the center console.
3. Remove the lock pin from the link adjuster.
4. Insert a 4.0 mm (0.16 inch) pin into the shift lever bracket through the N position cutout of the shift lever.
CAUTION: Be sure to use a 4.0 mm (0.16 inch) pin.
5. Verify that the shift position is in the N position on the transmission.