TL L5-2451cc 2.5L SOHC MFI (1997)
Valve Body: Service and Repair
Removal\Installation
REMOVAL
WARNING: Make sure lifts, jacks and safety stands are placed properly.
1. Raise the front of the vehicle, and support it with safety stands.
2. Set parking brake, and block both rear wheels securely.
3. Shift the transmission into the P position.
4. Remove the drain plug and drain the automatic transmission fluid (ATF). Reinstall the drain plug with a new sealing washer.
5. Remove the transmission mount and transmission mount bracket.
6. Remove the A/T gear position switch cover, then remove the ATF pan.
7. Remove the shift control solenoid valve connector (2P) from the connector holder, then disconnect it.
8. Remove the ATF strainer (four bolts).
9. Remove the main valve body plate (four bolts).
10. Remove the harness cover (four bolts).