TL V6-3.2L (2004)
RDX shown for reference
12.
Connect the black No.2 connector of the AcuraLink reprogramming cable to the DLC cable. Connect the DLC cable to the GNA600. The LEDs
on the GNA6OO flash green and yellow. Within 30 seconds of the LEDs flashing, do step 13.
13.
Connect the yellow No.3 connector of the Acuralink reprogramming cable to the other 5P connector.
14.
After the green LEDs on the GNA600 stay on, disconnect the DLC cable from the GNA6OO. The current program ID has been captured.
15.
Disconnect the yellow No.3 connector of the reprogramming cable from the vehicle.
At the workstation: Downloading the new software to the GNA600
16.
Connect the USB PC interface cable to the GNA6OO.
17.
Connect the power supply cord to the GNA600.
