TL V6-3.2L (2004)
5. Pull out the hood rear seal (A). Using a clip remover, detach the clips from the cowl covers.
6. Detach the clips (A, B) by carefully pulling the passenger's cowl cover (C) upward, and release the hook (D) on the passenger's cowl cover from
the driver's cowl cover (E), then remove the cover by releasing the hook (F).
7. Disconnect the windshield washer tubes (G).
8. Detach the clips (A, B, C) by carefully pulling the driver's cowl cover (D) upward, then remove the cover by releasing the hooks (E).
9. Install the cover in the reverse order of removal and note these items:
-
Check for damaged of stress-whitened clips, and replace them with new ones
-
Make sure the washer tubes are connected securely.
-
Push the clips into place securely.
