TL V6-3.2L (2004)
5. Remove the lock cylinder (A) (driver's door) or outer handle cover (B) (passenger's side).
1. Remove the maintenance hole seal (C).
2. Loosen the bolt securing the lock cylinder (driver's door), or outer handle cover (passenger's side).
3. Disconnect the cylinder rod (D) (driver's door) from the bushing (E).
NOTE:
-
Hold the lock cylinder (driver's door) or outer handle cover (passenger's side) with your hand to prevent it from falling when removing the
bolt.
-
Check the bushing for damage and replace if necessary.
6. Disconnect the cylinder switch connector (A), and detach the harness clip (B), then remove the cylinder switch (C) (driver's door).