TL V6-3.2L (2004)
^
Refer to section 22 of the appropriate service manual, or
^
Online, enter keywords WINDOW CONTROL UNIT, and select Power Window Control Unit Reset from the list.
REPAIR PROCEDURE C
1. Remove the front door panel, the plastic cover, and the door glass regulator:
^
Refer to section 20 of the appropriate service manual, or
^
Online, enter keyword REGULATOR, and select Front Door Glass and Regulator Replacement from the list.
2. Replace the door glass run channel, and check the door glass inner weatherstrip for proper length. The end of the weatherstrip should be even with
the door panel. If the weatherstrip is too long, replace it (refer to step 5 of REPAIR PROCEDURE A).
3. Install a new door glass regulator, and reassemble the remaining parts in the reverse order:
^
Refer to section 20 of the appropriate service manual, or
^
Online, enter keyword REGULATOR, and select Front Door Glass and Regulator Replacement from the list.
4. Reset the power window control unit:
^
Refer to section 22 of the appropriate service manual, or
^
Online, enter keywords WINDOW CONTROL UNIT, and select Power Window Control Unit Reset from the list.
Disclaimer
