TL V6-3.2L (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Glass Outer Weatherstrip Replacement
NOTE:
-
Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend during removal.
-
Put on gloves to protect your hands.
-
Take care not to scratch the door.
1. Remove the door panel.
2. Remove corner portion of the weatherstrip.
3. Remove the screw and sealing washer from the front edge of the door.
4. Starting at the front, pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the
window slot. Take care not to bend the door outer molding (C).