TL V6-3.2L (2004)
Trunk / Liftgate Lock: Service and Repair
Trunk Pass-Through Cover
Trunk Pass-through Cover Replacement
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the rear seat-back.
2. Remove the screws, and detach the hooks (A), then remove the trunk pass-through lid (B).
3. Release the clips (A), then remove the trunk pass-through cover (B).
4. Install the trunk pass-through cover in the reverse order of removal, and note these items:
-
To prevent wrinkles, make sure the material is stretched evenly over the pad before securing the clips.
-
Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).
