TL V6-3.2L (2004)
Trunk / Liftgate Weatherstrip: Service and Repair
Trunk Lid Weatherstrip Replacement
1. Remove the trunk lid weatherstrip (A) by pulling it off.
2. Apply clear sealant (B) into the channel of the trunk lid weatherstrip all the way around.
Sealant: Cemedine P/N 08712-0004, or equivalent
3. Locate the seam on the trunk lid weatherstrip, align it with the center of the trunk lid striker, and install the trunk lid weatherstrip all the way
around in the direction shown. Make sure there are no wrinkles in the weatherstrip.
4. Check for water leaks.
