TL V6-3.2L (2004)
4. Release the clips (A) securing the front floor carpet (B) and rear floor carpet (C).
5. Release the hooks (D) with a flat-tip screwdriver by pushing the screwdriver toward the door, then lifting upwards. Cut the carpet in the areas (E)
shown, then remove the carpet.
6. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harnesses and antenna lead are routed correctly.
-
Check for damaged or stress-whitened clips, and replace them with new ones.
