TL V6-3.2L (2004)
Glove Compartment Lock Cylinder: Service and Repair
Glove Box Lock Cylinder Replacement
NOTE: Take care not to scratch the glove box.
1. Remove the glove box.
2. Remove the screws, then remove the glove box front trim (A) from the glove box (B).
3. Remove the screws, then remove the knee bolster (A) from the glove box front trim (B).
4. Remove the glove box lock knob body (A).
1. Disconnect the lock rod (B).
2. Gently spread the locking tabs (C) apart to release the lock knob (D), then remove the lock knob.
3. Remove the screws.
