TL V6-3.2L (2004)
5. Pull out the front door opening trim (A) from the trim hooks (B) and around the front door opening flange, then remove the trim.
6. Install the trim in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Push the clips into place securely.
Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the rear seat cushion.
2. Remove the rear door sill trim (A).
1. Pull out the rear door opening trim (B) from the lower part of the rear door opening flange.
2. Pull the rear door sill trim up by hand to detach the clips (C), and to release the hooks (D) and tabs (E) from the B-pillar lower trim (F) and the
rear seat side trim (G). then remove the trim.
3. If necessary, pull the rear side outer trim (H) up to detach the hooks (I), then remove the trim.
4. Remove the rear seat-back.
