TL V6-3.2L (2004)
Power Mirror Control Module: Testing and Inspection
Power Mirror Control Unit Input Test
NOTE: Before troubleshooting the DPMS, troubleshoot the multiplex integrated control system first using B-CAN System Diagnosis Test Mode A.
1. Turn the ignition switch OFF.
2. Remove the dashboard lower cover.
3. Disconnect the 26P connector (A) from the power mirror control unit (B).
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.