TL V6-3.2L (2004)
Sun Shade: Service and Repair
Sunshade Replacement
1. Remove the drain channel.
2. Remove the screws, then remove the set plates (A) from each side.
3. Slide the sunshade (A) until you can see both front sunshade base sliders (B).
4. While lifting the front portion of the sunshade (A), move the sunshade forward until you can see both rear sunshade base sliders (B). Do not
damage the sunshade.
5. Release both rear sunshade base sliders from the guide rail portions of the frame, then remove the sunshade.
6. Install the sunshade in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the set plate mounting screws before reinstallation.
-
Check the glass height adjustment.
7. Do the moon roof calibration.
8. Check for water leaks. Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray.
