TL V6-3.2L (2004)
Front Door Window Glass Weatherstrip: Service and Repair
Front Door Glass Outer Weatherstrip Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
The door glass outer weatherstrip will need replacement because it will bend during removal.
-
Put on gloves to protect your hands.
-
Take care not to scratch the door.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove these items:
-
Door panel
-
Power mirror
2. Remove lower portion of the weatherstrip.
3. Remove the screw from the rear edge of the door.
4. Starting at the rear, pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the
window slot, then remove the weatherstrip.
5. Install a new weatherstrip in the reverse order of removal.
