TL V6-3.2L (2004)
DIAGNOSIS
NOTE:
If the brake pedal travel is not lower than normal and the feel is not softer than normal, do not do the diagnosis or the repair.
1.
Inspect the brake system, and replace any leaking, worn, or damaged parts.
2.
Manually bleed the brakes. Do not use a power bleeder:
^
Refer to the Brakes section of the appropriate service manual, or
^
Online, enter keyword BLEED, and select Brake System Bleeding from the list.
3.
Apply the brakes to check the height and feel of the pedal.
^
If the brake pedal height and feel is now normal, go to REPAIR PROCEDURE.
^
If the brake pedal height and feel is still low and soft, continue with normal troubleshooting procedures.
REPAIR PROCEDURE
Replace the VSA modulator-control unit:
^
Refer to the Brakes section of the appropriate service manual, or
^
Online, enter keyword VSA MOD, and select VSA Modulator-Control Unit Removal and Installation from the list.
Disclaimer
