TL V6-3.2L (2004)
13. Install the brake caliper (A).
14. Install the caliper bolts (B), and torque it to the specified torque while holding the caliper pins (C) with a wrench being careful not to damage the
pin boot.
15. Install the brake hose onto the suspension arm with the mounting bolt.
16. Press the brake pedal several times to make sure the brakes work, then road-test the vehicle.
NOTE: Engagement of the brake may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
17. After installation, check for leaks at the hose and line joints and connections, and retighten if necessary.
