TL V6-3.2L (2004)
1. Apply Molykote 44 MA grease to the sliding surface of the pivot pin (A), and insert the pin into the brake shoe (B) from the rear side.
2. Install the parking brake lever (C) and wave washer (D) on the pivot pin, and secure with a new U-clip (E).
^
Install the wave washer with its convex side facing out.
^
Pinch the U-clip securely to prevent the pivot pin from coming out from the brake shoe.
3. Connect the parking brake cable (A) to the parking brake lever (B). Apply silicone grease to the cable contact surface (C) on the backing plate.
4. Apply Molykote 44 MA grease to the shoe ends and connecting rod ends (A), sliding surfaces (B), and opposite edges of the parking brake shoe
(C) as shown. Wipe off any excess. Keep grease off the brake linings.
