TL V6-3.2L (2004)
Camshaft: Testing and Inspection
Camshaft Inspection
1. Remove the cylinder head.
2. Remove the rocker arms.
3. Put the rocker shafts on the cylinder head, then tighten the bolts to the specified torque.
NOTE: Apply new engine oil to the threads and flange of the exhaust rocker shaft mounting bolts.
4. Seat the camshaft by pushing it toward the rear of the cylinder head.
5. Zero the dial indicator against the end of the camshaft. Push the camshaft back and forth and read the end play. If the end play is beyond the
service limit, replace the thrust cover and recheck. If it is still beyond the service limit, replace the camshaft.
