TL V6-3.2L (2004)
Crankshaft Main Bearing: Specifications
Crankshaft Bearing
Main bearing-to-journal oil clearance
Standard or New ............................................................................................................................................ 0.020 - 0.044 mm (0.0008 - 0.0017 in.)
Service Limit ............................................................................................................................................................................ 0.050 mm (0.0020 in.)
Rod bearing clearance
Standard or New ............................................................................................................................................ 0.020 - 0.044 mm (0.0008 - 0.0017 in.)
Service Limit .............................................................................................................................................................................. 0.050 mm (0.002 in.)
Tighten the bearing cap bolts (A), and then the bearing cap side bolts (B) to the specified torque in the sequence shown. Repeat the torque sequence
again to assure the bolts are properly torqued.
Main Bearing Selection
Crankshaft Bore Code Location
Letters or bars have been stamped on the end of the block as a code for the size of each of the four main journal bores.
