TL V6-3.2L (2004)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley Removal and Installation
Special Tools Required
^
Holder handle 07JAB-001020B
^
Holder attachment, 50 mm, offset 07MAB-PY3010A
^
Socket, 19 mm 07JAA-001020A, or a commercially available 19 mm socket
Removal
1. Remove the right front tire/wheel.
2. Remove the splash shield.
3. Remove the drive belt.
4. Hold the pulley with the holder handle (A) and holder attachment (B).
5. Remove the bolt with a heavy duty 19 mm socket (C) and breaker bar, then remove the crankshaft pulley.
Installation
1. Clean the pulleys (A), crankshaft (B), bolt (C), and washer (D). lubricate with new engine oil as shown.
