TL V6-3.2L (2004)
NOTE: The compression pressure should not exceed 9,800 N (1,000 kgf, 2,200 lbs.).
Belt Tensioner Installation and Torque
8. Install the auto-tensioner.
NOTE: Make sure the pin stays in place.
9. Screw the battery clamp bolt in as shown to hold the timing belt adjuster. Tighten it by hand, do not use a wrench.
10. Apply liquid thread lock (P/N 08713-0001) to the idler pulley bolt, then loosely install the idler pulley.
11. Install the timing belt in a Counterclockwise sequence starting with the drive pulley.