TL V6-3.2L (2004)
Air Door Actuator / Motor: Service and Repair
Driver's Air Mix Control Motor
Driver's Air Mix Control Motor Replacement
1. Remove the driver's dashboard lower cover.
2. Disconnect the 10P connector (A) from the driver's mode control motor. Disconnect the 5P connector (B) from the driver's air mix control motor
(C). Remove the self-tapping screws and the driver's air mix control motor from the heater unit.
3. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make
sure the motor runs smoothly.
