TL V6-3.2L (2004)
2.
While the vent is rattling, apply a small amount of pressure to the lower aluminum trim on the driver's side vent.
^
If the rattle is affected by the pressure, go to REPAIR PROCEDURE.
^
If the rattle is not affected by the pressure, continue with normal troubleshooting.
REPAIR PROCEDURE
NOTE:
Be careful not to scratch the dashboard and related components when removing the vent. Also, make sure to put on gloves to protect your hands from
sharp objects.
1.
Remove the driver's dashboard lower cover:
^
Refer to the Body section of the appropriate service manual, or
^
Online, enter keyword LOWER DASH, and select Driver's Dashboard Lower Cover Removal/Installation from the list.
2.
Remove the driver's side vent:
^
Refer to the Body section of the appropriate service manual, or
^
Online, enter keyword DASH SIDE, and select Dashboard Side Vent Removal/Installation from the list.
3.
Cut a 10 mm x 20 mm piece of wool felt.
