TL V6-3.2L (2004)
8. Remove the bolts from the condenser.
9. Remove the bolt, then disconnect the discharge line from the condenser.
10. Remove the condenser by lifting it up. Be careful not to damage the radiator and condenser fins when removing the condenser
11. Install the condenser in the reverse order of removal, and note these items.
-
If you're installing a new condenser, add refrigerant oil (DENSO ND-OIL 8).
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the correct
O-rings for HFC-134a (R-134a) to avoid leakage.
-
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
-
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.
-
Charge the system.
-
Enter the anti-theft codes for the radio and the navigation system, then enter the customer's XM radio channel presets.
