TL V6-3.2L (2004)
Receiver Dryer: Service and Repair
Receiver/Dryer Desiccant Replacement
NOTE: Install the Receiver/Dryer as quickly as possible to preset the system from absorbing moisture from the air.
1. Remove the condenser.
2. Remove the bolts from the condenser, then remove the receiver/dryer (A), the bracket (B) and the O-rings (C).
3. Install the receiver/dryer in the reverse order of removal, and note these items:
Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) be(ore installing them. Be sure to use the correct
O-rings for HFC-134a (R-134a) to avoid leakage.