TL V6-3.2L (2004)
6. Squeeze the tool with both hands until the stops make contact.
7. Crimp the insulation crimp.
-
If you do not have a wire seal, then use the next larger size crimp slot. Position the crimping tool over the insulation crimp section of the
terminal, then squeeze the tool with both hands until the stops make contact.
-
If you have a wire seal, position the insulation crimp in the 5.5 crimping slot, then carefully squeeze the crimp closed until its ends are
touching and making a full-circle shape.
8. Inspect the quality of the wire crimp. If it has any of the above mentioned NO GOOD crimps, cut it off and start over.
