TL V6-3.2L (2004)
48. Measure voltage between ECM/PCM connector terminal A5 and body ground.
Is there battery voltage?
YES - Go to step 53.
NO - Go to step 49.
49. Turn the ignition switch OFF.
50. Remove the kick panel. Then remove PGM-FI main relay 1 (FI MAIN) (A) from the under-hood fuse/relay box.
51. Measure voltage between PGM-FI main relay 1 (FI MAIN) 4P connector terminal No.3 and body ground.
Is there battery voltage?
YES - Go to step 52.
NO - Repair open in the wire between the No.8 FI ECU (ECM/PCM) (15 A) fuse and PGM-FI main relay 1.