acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Center Mounted Brake Lamp:|06-024|Page 9849 > < Brake Light Switch|Description and Operation|Page 9843
Page 1
background image

Center Mounted Brake Lamp: Customer Interest
Lighting - High Mount Brake Light Cover Loose

06-024

September 1, 2006

Applies To: 
2004-05 TL - ALL

*2006 TL - From VIN 19UUA6...6A000001 thru 19UUA6...6A061378*

High Mount Brake Light Cover Material Comes Loose
(Supersedes Service Bulletin 06-024, dated August 23, 2006, to update the information marked by asterisks)

SYMPTOM

The material on the high mount brake light cover is loose or bubbling.

PROBABLE CAUSE

The adhesive was improperly applied during manufacturing.

CORRECTIVE ACTION

Replace the high mount brake light cover.

PARTS INFORMATION

High Mount Brake Light Cover:

Moon Lake Gray, NH528L - 

P/N 83206-SEP-A00ZA

Light Tan, YR167L - 

P/N 83206-SEP-A00ZB

Light Cream, YR240L - 

P/N 83206-SEP-A00ZC

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

714150

Flat Rate Time:

0.2 hour

Failed Part:

P/N 83206-SE P-A00ZA

Defect Code:

02502

Symptom Code:

03220

Template ID:

06-024A (Moon Lake Gray) 
06-024B (Light Tan)
06-024C (Light Cream)

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

Customer Interest for Center Mounted Brake Lamp:|06-024|Page 9849 > < Brake Light Switch|Description and Operation|Page 9843