TL V6-3.2L (2004)
Fuel Line Coupler: Service and Repair
Fuel Line/Quick-Connect Fitting Precaution
The fuel line/quick-connect fittings connect the fuel rail (A) to the fuel feed hose (B), fuel feed hose (B) to the fuel feed hose (C), the fuel feed hose (C)
to the fuel line (D), the fuel line (E) to the fuel tank unit (F) and the fuel vapor tine (G) to the EVAP canister (H). When removing or installing the fuel
feed hose, fuel tank unit, or fuel tank, it is necessary to disconnect or connect the quick-connect fittings.
Pay attention to the following:
-
The fuel feed hoses, fuel line, and quick-connect fittings are not heat-resistant; be careful not to damage them during welding or other heat-
generating procedures.
-
The fuel feed hoses, fuel line, and quick-connect fittings are not acid-proof; do not touch them with a shop towel that was used for wiping battery
electrolyte. Replace them if they came into contact with electrolyte or something similar.
-
When connecting or disconnecting the fuel feed hoses, fuel line, and quick-connect fittings, be careful not to bend or twist them excessively.
Replace them if they are damaged.
