TL V6-3.2L (2004)
Throttle Cable/Linkage: Service and Repair
Throttle Cable Removal/Installation
1. Remove the throttle cable cover.
2. Fully open the accelerator pedal position, then remove the throttle cable (A) from the throttle link (B).
3. Remove the cable housing (C) from the cable bracket (D).
4. Remove the throttle cable (A) from the accelerator pedal (B).
5. Install the cable in the reverse order of removal.
6. Start the engine. Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle.
7. Hold the cable, removing all slack from it.
