acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Climate Control Power and Ground Circuit Troubleshooting|Page 2696 > < Engine Control Module|Diagrams|Connector Views|ECM/PCM|Page 2693
Page 1
background image

Engine Control Module: Testing and Inspection
Climate Control Power and Ground Circuit Troubleshooting

Climate Control Power and Ground Circuit Troubleshooting

1. Check the No.30 (7.5 A) fuse in the under-dash fuse relay box.

Is the fuse OK?

YES - Go to step 2.

NO - Replace the fuse, and recheck

2. Disconnect climate control unit connector A (20P).
3. Turn the ignition switch ON (II).

4. Measure the voltage between the No.1 terminal of climate control unit connector A (20P) and body ground.

Is there battery voltage?

YES - Go to step 5.

NO - Repair open in the wire between the No.30 fuse in the under-dash fuse/relay box and the climate control unit.

5. Turn the ignition switch OFF.

6. Check for continuity between the No.3 (Canada) and No.6 terminal of climate control unit connector A (20P) and body ground.

Climate Control Power and Ground Circuit Troubleshooting|Page 2696 > < Engine Control Module|Diagrams|Connector Views|ECM/PCM|Page 2693