TL V6-3.2L (2004)
5. Remove the mounting bolts (A) from the brackets.
6. Remove the side curtain airbag assembly
Installation
NOTE:
-
Installation of the side curtain airbag must be performed according to the precautions/procedures described at the beginning of the SRS procedures
-
If the airbag is frayed, or has other visible damage, replace it. Do not attempt to repair an airbag.
-
When you install the airbag, make sure it is not twisted, and that it is not caught between the inflator bracket by the bracket bolts.
-
Make sure that the side curtain airbag inflator retainer is installed properly, otherwise the airbag could cause improper deployment and cause
damage or injuries.
1. Place the new side curtain airbag assembly on the side of the roof. Tighten the side curtain airbag mounting bolts (A).
