TL V6-3.2L (2004)
Left side shown; right side is similar.
2. Connect the side curtain airbag 2P Connector (A) to the side curtain airbag herness.
3. Reconnect the battery negative cable.
4. Connect the HDS and erase the DTCs.
5. After installing the aide curtain airbag. confirm proper system operation: Turn the ignition switch (II); the SRS indicator should come on for about
6 seconds and then go off.
6. Install all removed parts.
.
Confirm proper headliner/pillar trim overlap. See Checking and adjusting the headliner/Pillar Trim Overlap.
