TL V6-3.2L (2004)
1. Install the headliner (A) and the pillar trims (B).
2. Using masking tape on the headliner, mark the upper edge of each pillar trim.
3. Remove the pillar trims, and measure the headliner overlap.
-
If the overlap is less than 15 mm, remove the tape, and install the pillar trims.
-
If the overlap is 15 mm or more, go to step 4.
4. Carefully trim the headliner with a utility knife, reducing the overlap to less than 15 mm.
5. Remove the tape, and install the pillar trims.