acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Front Seat Belt Replacement|Page 7447 > < Seat Belt|Locations
Page 1
background image

Seat Belt: Service and Repair
Front Seat Belt Replacement

Front Seat Belt Replacement

SRS components are located in this area. Review the SRS component locations   and the precautions and procedures  before performing repairs or
service.

NOTE:  Check the front seat belts for damage, and replace them if necessary.

Front Seat Belt

1. Make sure you have the anti-theft codes for the audio and navigation systems, and then write down the XM radio channel presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Slide the front seat forward fully.
4. Remove the B-pillar lower trim.

5. Pull the lower anchor cover (A) up, and remove the lower anchor bolt (B) and double-shouldered washer (C).
6. Remove the B-pillar upper trim and slider.

7. Remove the upper anchor bolt (A).

Front Seat Belt Replacement|Page 7447 > < Seat Belt|Locations