TL V6-3.2L (2004)
Starter Solenoid: Testing and Inspection
Starter Solenoid Test
1. Check the hold-in coil for continuity between the S terminal and the armature housing (ground). There should be continuity.
-
If there is continuity, go to step 2.
-
If there is no continuity, replace the solenoid.
2. Check the pull-in coil for continuity between the S terminal and M terminal. There should be continuity.
-
If there is continuity, the solenoid is OK.
-
If there is no continuity, replace the solenoid.
