TL V6-3.2L (2004)
11. Tighten the pump mounting bolts to the specified torque.
12. Install the drive belt W.
Note these items during belt installation:
^
Make sure that the belt is properly positioned on the pulleys (B).
^
Do not get power steering fluid or grease on the auto-tensioner, alternator, A/C compressor, and drive belt or pulley faces. Clean off any fluid
or grease before installation.
13. Install the side engine mount bracket. Tighten the bolts to the specified torque.
14. Fill the reservoir to the upper level line.
15. Install the right side engine component cover.