TL V6-3.2L (2004)
29. Remove the two flange bolts from the right side of the gearbox, then remove the gearbox mounting bracket (A) and cushion (B).
30. Move the steering gearbox toward the front, and remove the pinion shaft grommet (A) from the top of the valve body unit.
31. Apply vinyl tape (B) to the splines on the pinion shaft.
32. Apply vinyl tape or equivalent material (A) to brake lines (B) to protect if from the pinion shaft.
33. Move the steering gearbox to the driver's side, and rotate it so the pinion shaft points toward the front of the vehicle.
