TL V6-3.2L (2004)
2. Position the two tabs (A) of the turn signal canceling sleeve (B) as shown. Install the steering wheel on to the steering column shaft, making sure
the steering wheel hub (C) engages the pins (D) of the cable reel and tabs of the canceling sleeve. Do not tap on the steering wheel or steering
column shaft when installing the steering wheel.
3. Install the steering wheel bolt (A) and tighten it to the specified torque. Connect the audio remote switch, the cruise control set/resume switch and
the HFL/HFL-voice control switch connectors (if equipped). Make sure the wire harness is routed and fastened properly.
4. Install the driver's airbag, and confirm that the system is operating properly.
5. Enter the anti-theft codes for the radio and the navigation system, then enter the customer's XM radio channel presets. Reset the clock.
6. Check the cruise control, audio remote, navigation system, voice control, HFL, and turn signal canceling for proper operation.