TL V6-3.2L (2004)
4. Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper
should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.
5. Check for oil leaks, abnormal noises, and binding during these tests.
Reassembly
1. Install all parts except the self-locking nut and washer onto the damper unit by referring to the Exploded View. Align the bottom of the spring (A)
and the stepped part of the lower spring seat (B), and align the damper mounting base (C) as shown.
2. Install the damper assembly on a commercially available strut spring compressor (D).
3. Compress the damper spring with the spring compressor.